1-800-540-8325
Quality Products and
Lubricants
SHELL PRODUCTS
|
| Heavy Duty Engine Oils |
Description |
| Shell ROTELLA SB Multigrade Oils |
These oils are recommended for all types of service
in truck and automotive four-stroke diesel engines calling for any of the API Service
Categories listed. They can also be used in gasoline engines calling for API SH
grade motor oils. They are especially suited for use in turbocharged engines where
high operating temperatures are encountered. The 10W-40 grade is particularly recommended
for use in cold winter climates in engines where the manufacturer recommends a 10W- oil
for winter startability and critical oil pumpability at low temperatures but prefers an
oil with 40 weight performance once the engine is warmed up. |
| Shell ROTELLA T Multigrade Oils |
The SAE 15W-40 is Shell's premium quality, heavy-duty
multigrade oil for all-season use in diesel powered or a mix of gasoline and diesel
powered vehicles and equipment. This same premium multigrade oil is available in an SAE
10W-30 grade to provide even better low temperature performance in colder climates and
fuel economy benefits when compared to an SAE 15W-40 grade, and to satisfy the demands of
engine builders who recommend lower viscosity grades. |
| Shell ROTELLA T Single Grade Oils |
Shell ROTELLA T single grade oils have been performance
proven in diesel and mixed diesel/gasoline on-highway truck fleets for over 3 billion
miles. These engine oils satisfy a wide range of heavy-duty diesel manufacturers'
specifications of Detroit Diesel to the high detergency requirements of Caterpillar.
These oils help keep engines clean, fight wear of vital, closely fitting engine parts, and
resist corrosion from acidic combustion products. |
| Passenger Car Motor Oils |
Description |
| FormulaShell Motor Oils |
FormulaShell Motor Oils are energy conserving oils,
offered in six viscosity grades. These motor oils flow at low temperatures for cold
weather starts & protect engines against wear during both cranking and high
temperature operation. They contain additives that suspend contaminants and help
keep engines clean. They provide friction-reducing properties that work to increase
gasoline mileage. |
| Automotive Gear Lubricants |
Description |
| Shell DENTAX S Gear Oil |
This is a specially formulated, SAE 50, synthetic
lubricant that was developed for heavy duty manual transmissions operating under severe
conditions or requiring extended oil drain intervals. It gives excellent low
temperature performance and high temperature stability for long service life. It is
approved by Eaton for use in conjunction with Eaton Roadranger extended warranties. |
| Shell SPIRAX Heavy Duty Gear Oil |
These Gear Oils are extreme-pressure, multigrade,
multipurpose gear lubricants for automotive differentials and manual transmissions.
They contain a sulfur-phosphorus additive system for excellent load carrying
capacity. They minimize wear and protect against scuffing, protect against rust,
corrosion and foaming. The 80W-90 grade is Shell's primary recommendation for
passenger cars and light trucks. The 85W-140 grade is Shell's primary recommendation
for both on- and off-highway fleets, and is especially suitable for heavy duty equipment
or mixed fleets used in industrial and commercial applications. |
| Shell SPIRAX S Gear Oils |
These Gear Oils are heavy duty, synthetic lubricants
that are formulated to meet the severe demands imposed by cold weather and high operating
temperatures. They excel in low temperature performance, high temperature stability,
water separation, and resistance to viscosity loss by shearing. |
Automotive Transmission
& Torque Converter Fluids |
Description |
| Shell DONAX T Transmission Fluids |
These Transmission Fluids are premium oils for automotive
transmissions and hydraulic systems. These products are designed to provide proper
frictional characteristics, high thermal and oxidation stability, ample protection against
rusting, protection against wear, high dispersancy, excellent anti-foam properties,
correct viscosity at operating temperatures, and good seal compatibility. |
| Aviation Lubricants |
Description |
| AEROSHELL Fluid 4 |
A mineral hydraulic oil with low temperature
characteristics that is capable of operating over a wide range of temperatures. This
fluid is oxidation inhibited, and it contains a special antiwear additive. AEROSHELL Fluid
4 is dyed red for identification and leak detection purposes. It can be used in both
aviation and non-aviation systems with synthetic rubber components. |
| AEROSHELL Oils |
AEROSHELL Oils are straight mineral oils blended from
selected high viscosity index base stocks. These oils are used during break-in of
most 4-stroke cycle certified aviation piston engines. Aeroshell oils are approved for all
4-stroke cycle certified aircraft piston engines when use of an ashless dispersant (AD)
oil is not required. |
| AEROSHELL Oil W Single Grade Oils |
These Single Grade Oils are premium ashless dispersant
lubricating oils for 4-stroke cycle certified aircraft piston engines. They have
been proven in billions of engine hours around the world, including service in
fuel-injected and turbocharged engines. They promote engine cleanliness, help keep engines
sludge free, help reduce oil consumption, help engines reach TBO, protect highly stressed
engine scuffing and wear. |
| Anti-corrosion Antiwear AEROSHELL Oil W 15W-50
Multigrade |
This is an advanced formula semi-synthetic, ashless,
highly despersant multigrade oil for 4-stroke cycle certified aircraft piston engines that
offers an exceptionally broad viscosity grade range. This premium quality oil
contains over 50% synthetic base stocks to insure excellent low temperature flow to speed
cold starts while lubricating and protecting critical engine parts during warm up; yet, at
high temperatures, it offers engine protection that is superior to a Grade 100 (SAE 50
oil). |
| Shell ALVANIA EP Greases |
These greases contain a combination of extreme pressure
and other additives to give increased load carrying properties. They have excellent
salt water protection and anti-rust properties. They are recommended for both
on- and off-highway equipment, construction equipment and industrial applications that
require extreme pressure protection in heavy or shock loading conditions. |
| Shell DARINA EP Greases |
These greases are premium quality, multipurpose,
extreme pressure, non-soap greases that can be used in industrial plant applications over
a wider temperature range than most industrial soap based greases. They stay on the
job without excessive thickening or thinning. They resist oxidation for long life,
withstand the effects of water, fight corrosion of bearing surfaces, have outstanding load
carrying ability, and offer ample thermal and mechanical stability. |
| Shell RETINAX HD Greases |
The selected additives in these greases gives them
excellent EP / load carrying ability, oxidation stability, rust protection and metal
surface adherence. These greases are recommended for industrial, mining and construction
applications where high mechanical stability and outstanding water washout properties are
needed. Shell Retinax HD 2 Grease is USDA H-2 approved for use in meat and poultry
plants where there is no chance of contact with the edible product. |
| Shell RETINAX LC Grease |
This grease is formulated for the severe requirements of
heavy duty truck service. RETINAX LC, dyed red for easy identification, is suitable
for lubrication of wheel bearings, chassis, king pins, universal joints and fifth
wheels. It provides excellent oxidation stability for long life. |
| Gas Engine Oils |
Description |
| Shell MYSELLA Oils |
These oils are ash free, dispersant crankcase oils for use
in engines fueled by natural gas. Being ashless, they do not contribute to
combustion chamber deposits, which can cause spark plug fouling and pre-ignition.
Typical installations of the Single Grade Oils are in gas transmission, total energy
plants, electric power generators, chemical plants and various engine applications. |
| Shell MYSELLA LA Oils |
These oils are low ash natural gas engine oils made with
select base stocks and carefully chosen additives to insure optimum performance. The
15W-40 oil is particularly applicable in 4-stroke cycle engines that may need to be shut
down and re-started in cold climates. Single Grade Oils are recommended for both 2-
and 4-stroke engines that do not call for ashless type oils. |
| Shell MYSELLA MA Oils |
These oils are medium ash gas engine oils. They are
formulated to meet the requirements of exhaust gas catalytic converter
manufacturers. The oils are recommended for two- and four-cycle engines that do not
require ashless oils. |
| Marine & Railroad
Engine Oils |
Description |
| Shell NAUTILUS 2-Cycle Marine Oil |
This oil meets the requirements of Chrysler, Evinrude,
Force, Johnson, Mariner, Mercury, OMC, Sears, Suzuki and Yamaha engines. Other
gasoline powered 2-cycle applications such as lawn mowers, chain saws, motorcycles, snow
blowers and snowmobiles can benefit from the use of this oil, which is suitable for use in
both mixed oil/fuel systems and direct injection engines. |
| Industrial Lubricants |
Description |
| Shell DIALA Oils |
These oils are electrical insulating oils designed for
superior performance in transformers, switch gears and X-ray equipment. Shell DIALA
Oils resist formation of acids and sludge that can shorten equipment life. They
possess excellent electrical properties for the severe requirements of electrical
equipment. |
| Shell MORLINA Oils |
These oils exhibit excellent water separation
characteristics and extremely low foaming tendencies. They are intended
for use in enclosed bath, splash and circulating systems. They are recommended for
the lubrication of plain and rolling bearings, slides, machine tools and in low to
normally loaded enclosed gear reducers where non-EP AGMA oils are specified. All
Shell MORLINA Oils are approved by the USDA for H-2 use in meat and poultry processing
plants where there is no possible contact between the lubricant and the edible product. |
| Shell OMALA Gear Oils |
These oils protect and help extend the service life of a
wide variety of enclosed industrial gearing, including spur, bevel, herringbone and some
worm gears. Lighter grades of OMALA Oils are well suited for use
in oil mist lubrication systems, due to their good mistability, excellent recovery, and
thermal/oxidation stability. These are industrial oils and are not intended for
automotive use. They are USDA H-2 approved for use in meat and poultry plants where
there is no chance of contact with edible product. |
| Shell TELLUS Oils |
These oils are antiwear hydraulic oils designed to give
long service in high output hydraulic systems that use vane, piston or gear pumps.
Shell TELLUS Oils meet all requirements of major pump manufacturers that do not prohibit
the use of zinc additives. All TELLUS Oils are approved by the USDA for H2 use in meat and
poultry processing plants where there is no possible contact between lubricant and edible
product. |
| Shell TELLUS T Oils |
These oils are premium grade, very high viscosity index
hydraulic oils designed for use in mobile and industrial equipment that is operated in a
wide range of subarctic and temperate climates. Shell TELLUS T Oils are designed for
use in mobile hydraulically operated equipment, marine hydraulic deck equipment, fire
trucks and fireboats, airport emergency vehicles, and electrical service equipment,
"Cherry Pickers". It is also approved by the USDA for H2
use in meat and poultry processing plants where there is no possible contact between
lubricant and edible product. |
| Shell TORCULA Oils |
These oils are specialty lubricants formulated to meet the
severe demands of pneumatic percussion tools, such as rock drills and jack hammers.
Special additives give these oils the ability to provide effective air cylinder
lubrication, even in damp or wet conditions. They are not intended for
"in-plant" air-line lubrication. |
| Shell TURBO T Oils |
These oils are premium quality turbine, hydraulic and
circulating oils designed to provide excellent lubrication of precision turbines in
industrial and marine service. Shell TURBO T Oil 32 is widely used for lubrication
of electrical power generation turbines. Shell TURBO T Oils are premium rust and oxidation
inhibited oils for general plant bearing and gear lubrication. All three grades are
approved by the USDA for H2 use in meat and poultry plants where there is no possible
contact between lubricant and edible product. |
| SHELLZONE All Season Antifreeze |
This Antifreeze is a multipurpose, low silicate antifreeze
formulated for engine cooling systems, including heavy duty diesel and gasoline
truck engines, and engines made of aluminum. It contains less than 0.1% silicate,
and its balance of corrosion inhibitors makes it compatible with the use of supplemental
cooling additives that are recommended by some engine manufacturers. |
|